Descrizione

The Power T1500-1bdCP is a 1,500 Watt mono amplifier featuring Constant Power delivering up to 25% more power across all impedance loads. The frequency response of the T1500-1bdCP is optimized exclusively for use with subwoofers.

24dB/octave crossover MOSFET power supply MOSFET output stage 4 Gauge power/ground terminals Audiophile grade speaker connections RCA pass-thru Infrasonic filter

Class-bd amplifiers operate more efficiently than the standard A/B class, achieving 75-80% efficiency ratings. The Constant Power system works to deliver up to 25% more power, creating even louder audio than a similar system at the same power output could manage. Bass and Infrasonic filter controls work with the crossover control to adjust the overall sound quality, ensuring that it sounds right for the specific vehicle installation. RCA pass-thru and standard speaker outputs are both available to maximize compatibility.

Rockford Fosgate’s high-tech solutions yield more power Power Series amplifiers actively monitor their speakers’ performance using Rockford Fosgate’s Constant Power technology. A speaker’s impedance naturally fluctuates as it performs. So, just like your cruise control increases the engine’s RPM to maintain your car’s speed uphill, Constant Power maintains this amp’s output by increasing its internal voltage and current when the speaker’s impedance rises. This results in up to a 25% increase in the amp’s total power output, especially in the crucial range below 50 Hz where a sub amp really has to shine.
Rugged construction, massive bass Rockford Fosgate builds each Power Series mono amplifier with heavy-duty, state-of-the-art components. The award-winning Dynamic Thermal Management design manages the temperature of the internal components, distributing heat evenly for higher efficiency and lower distortion. The unique heat sink allows the heat to escape more readily so the high-power output transistors stay cooler and last longer.
Can you say 1,500 watts? The T1500-1bdCP mono sub amp uses an efficient Class bd design to deliver up to 1,500 watts to your subwoofer system from a remarkably compact chassis. This amp can even drive a 1-ohm load, so you can get massive bass out of a wide variety of system designs. The variable 24/dB per octave crossover creates a more natural sounding transition from your speakers to your subs. And the 2-year warranty tells you that Rockford Fosgate stands behind this bass behemoth.

Highlights: mono subwoofer amplifier 1,000 watts RMS x 1 at 4 ohms (1,500 watts RMS x 1 at 2 ohms) 1,500 watts RMS x 1 at 1 ohm Dynamic Thermal Management cooling system variable low-pass filter (35-250 Hz, 24 dB/octave) selectable subsonic filter (28Hz, 24 dB/octave) variable bass boost (0-18 dB at 45 Hz) Class-BD amplifier design MOSFET power and output stages preamp-level inputs and outputs 4-gauge power and ground leads and a 200-amp fuse recommended wiring and hardware not included with amplifier no onboard fuses when installing multiple amps in a system, an additional 200-amp in-line fuse between the distribution block and the amplifier is recommended 14-15/16’W x 2-1/4’H x 8-15/16’D

Informazioni aggiuntive