Descrizione

The Punch P400X4 is a 4-channel amplifier producing 100 Watts into all four channels at 2-Ohm. The P400X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels.
CEA-2006 Compliant CEA-2006 Power Rating50W x 4 4 1.0% THD+N Number of Channels 4 Total Power(Sum of Rated Power) 400 Watts Rated Power(RMS Continuous Power) 50 Watts x 4 4-Ohm100 Watts x 4 2-Ohm200 Watts x 2 4-Ohm Bridged Dynamic Power(PVC/PowerCube ) 82 Watts x 4 4-Ohm137 Watts x 4 2-Ohm266 Watts x 2 4-Ohm Bridged Bridgeable Yes Frequency Response 20Hz to 20kHz +/- 1.0dB Input Sensitivity 150 mV – 12 V Circuit Topology Class Class A/B Efficiency (average) 67% 4-Ohm Total Harmonic Distortion (THD+Noise) 4-Ohm: 2-Ohm: Signal Input Hi/Low level: 2 RCA pair Signal Output – Tone Controls Front Punch EQ2 Bass: 0dB to +18dB 45Hz and/orFront Punch EQ2 Treble: 0dB to +12dB 12.5kHzRear Punch EQ2 Bass: 0dB to +18dB 45Hz and/orRear Punch EQ2 Treble: 0dB to +12dB 12.5kHzFunction depends upon LP/AP/HP switch position Crossover Controls Front High-Pass/Low-Pass (HP/LP): 50Hz-250Hz 12dB/octave ButterworthRear High-Pass/Low-Pass (HP/LP): 50Hz-250Hz 12dB/octave ButterworthAll-Pass: Yes Remote Controls – Visual Indicators Power/Protect/Thermal LEDInput Clip LED3Output Clip LED1,2,3LED Color Legend:1BLUE: 2VIOLET: 1% THD3RED: 10%+ THD Power Wire Gauge 8 AWG to 4 AWG Power Input Connector Captive C-Clamp Speaker Wire Gauge 8 AWG to 18 AWG Speaker Output Connector Captive C-Clamp Cooling Convection Heatsink Operating Voltage 9 – 16 VDC Recommended Fuse(not included) 60 A Average Current Draw (13.8V Music) 30 A Max. Current Draw (13.8V Sinewave) 60 A Suggested Alternator 75 A Dimensional Diagram Dimensions (H x W x D) 2.38 x 7.76 x 11.03 (in)6.05 x 19.71 x 28.02 (cm) Shipping Weight 10.8 Lbs. (4.89 Kg.) REVIEWS

Informazioni aggiuntive