Descrizione

CARATTERISTICHE

Installazione
Lati terminali: Due Lati
Montaggio A Vite / Copertura: Connettori integrati di grosse dimensioni
Generale
Tipo Amplificatore: Classe-D (Digitale)
Design: 4 Cannali + Subwoofer
Thermal Control: Thermal Management Control
Power Supply: MOSFET
Power Supply Design: DC-DC PWM Power Supply
Board Circuitry: S.T.A.R. Circuitry
Current Protection: Over-Current, Over-Voltage and Thermal Protection
Power Indicator: Top Mounted Blue LED Power Indicator
4-Channel Speaker Level Input
Crossover: Variable Lowpass & Highpass Filter
Built-in Bass EQ
Built-in Subsonic Filter
Final Outputs: Direct FET
Board Design: 6-layer Glass Epoxy PC Board
Continuously Adjustable Gain Control
Remote Bass Control ( RUX-KNOB sold separately )

SPECIFICHE

Max Power Output Ratings
Max Power: 1200W
RMS Power Ratings
Per Channel into 4ohms, 14.4V ( 1%THD+N): 4 x 50W + 200W
Per Channel into 2ohms, 14.4V ( 1%THD+N): 4 x 75W + 300W
Bridged into 4ohms, 14.4V ( 1%THD+N): 2 x 150W
Sound Tuning
Crossover Frequency (LPF): 50 – 400Hz (-12dB/oct.) for Subwoofer
Crossover Frequency (HPF): 50 – 400Hz (-12dB/oct.) for CH-1/2/3/4
EQ (Equalizer): Bass EQ (fc=50Hz) 0 to +12dB
Subsonic: OFF / 5 – 30Hz (-24dB/oct.)
Dimensioni
Heat Sink: 210 x 58 x 230 mm
Footprint: 270 x 58 x 230 mm
Generale
Power Requirements: 14.4V DC (11 – 16V)
Input Sensitivity (RCA Input): 0.2 – 4.0V
Input Sensitivity (Speaker Level Input): 0.5 – 10V
Impedenza Ingresso: >10k ohms
Frequency Response (+0, -3dB: 1W into 4 ohms) for CH-1/2/3/4: 5Hz – 45kHz
Frequency Response (+0, -3dB: 1W into 4 ohms) for Subwoofer: 5 – 400Hz
Frequency Response (+0, -1dB: 1W into 4 ohms) for CH-1/2/3/4: 7Hz – 30kHz
Frequency Response (+0, -1dB: 1W into 4 ohms) for Subwoofer: 10Hz – 300Hz
THD+N (10W into 4 ohms) for CH-1/2/3/4: 0.02%
THD+N (10W into 4 ohms) for Subwoofer: 0.008%
THD+N (Rated Power into 4 ohms) for CH-1/2/3/4: 0.07%
THD+N (Rated Power into 4 ohms) for Subwoofer: 0.04%
Damping Factor for CH-1/2/3/4: >500
Damping Factor for Subwoofer: >1000
Signal to Noise (Rated Power into 4 ohms) for CH-1/2/3/4: 103dB
Signal to Noise (Rated Power into 4 ohms) for Subwoofer: 107dB
Remote Level: 0 to -20dB ( RUX-KNOB Required )
Peso: 2.8kg

Informazioni aggiuntive